FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 450 Parts

Category: Electrical System

[Categories] [All 450 Parts] [All Farmall Models]

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Battery Box - Restoration - For International / Farmall tractor models Super H, Super M, Super MTA, 300, 350, 400, 450, Replaces International OEM number 359500R91, 358693R91, 362059R92, Does not include mounting legs, Fits under the seat, Comes primered (color may vary). Prior to painting check fitment, (Item #: 151845) $117.00

Battery Box Grommet - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, H, I4, I6, I9, M, MD, O4, O6, Super H, Super M, Super MTA, Super W4, W4, W6, W9, 300, 350, 400, 450, Replaces International OEM number 248-1146, 24179D, 52118D, (Item #: 126446) $2.90

Coil, Original, 12 Volt - OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. This is an International Harvester OEM style 12 volt distributor coil. This distributor coil has a 2.8 ohm rating between the two primary winding terminals. Requires an external resistor. (Item #: 154651, Ref: 353875R91) $65.00

Coil, Original, 6 Volt - OEM style coil. Measures overall length of 5 3/8 inches, Diameter at widest point of center ridge is 2 1/4 inches. This distributor coil has a 1.4 ohm rating between the two primary winding terminals. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Item #: 154650, Ref: 353874R91) $65.00

Distributor - Original IHC design comes with a 32 tooth drive gear. For tractor models Super W6TA, Super W9, Super WD6, Super WD6-TA, Super WD9, Super WDR9, W4, W400, W450, W6, W9, WD6, WD9, WDR9, WR9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 504, 600, 650, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 3514. R6332. MHSK1 (Item #: 124839, Ref: 107304C91) $115.00

Distributor - New and complete distributor comes with a 32 tooth gear, and is for tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA and other IH equipment with International Distributors. Replaces: 107296C91, 107299C91, 107302C91, 107304C91, 353890R91, Distributor Housing Casting Number: 353898R11, 354900R91, 357935R91, 362473R91, 362722R91, 364653R91, 364696R92, 366928R91, 372712R91, 380622R91. Uses IH points (included). (Item #: 124839, Ref: 107304C91) $115.00

Distributor Assembly Less Base, Used - For International tractor models A, B, C, Cub, H, M, Super C, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 2504, Replaces International OEM number 107304C91, 07298C91, 357935R91, 366928R91, 381687R91, Without tachometer drive and with base, For a new version of this item use Item #: 203588, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403588) $176.01

Distributor Breaker Plate - Used on International Distributors, this plate is where points are secured. Points not included. Four Cylinder Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Replaces 352277R11 (Item #: 190142, Ref: 352277R11) $24.50

Distributor Cap - 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Item #: 105571, Ref: 351693R92) $9.10

Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Item #: 111108, Ref: 353903R1) $6.60

Distributor Drive Housing - This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Item #: 178938, Ref: 363749R91) $107.00

Distributor Drive Housing, Used - For International tractor models C, M, MD, MTA, Super A, Super C, 200, 230, 240, 300, 330, 340, 350, 400, 424, 450, 504, 2404, 2424, 2504, Replaces International OEM number 363763R11, With Tachometer Drive Hole, For a new version of this item use Item #: 178938, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429775) $65.01

Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Item #: 110682, Ref: 353934R11) $18.00

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: 424, 444, 450, W450, 460, 504, 560, 600, 606, 650, 656, 660, 706, 756, 806, 826, 856, 3514, 3616. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10

Distributor Gear - This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Item #: 111179, Ref: 353902R1) $30.00

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $9.60

Distributor Insulating Terminal Washer - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a Distributor Insulating Terminal Washer. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118474, Ref: 251538R1) $6.40

Distributor Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 110266, Ref: 353896R1) $4.00

Distributor Tach Drive Housing Block Off Plate - This new Distributor Tachometer Drive Housing Block Off Plate with Gasket is used with part number 363749R91 when a Tachometer is not used. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 363764R1, 363765R1. (Item #: 150708, Ref: 363764R1) $9.80

Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.50

Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20

Distributor with base and tach drive, Remanufactured - For International / Farmall tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 2504, With tachometer drive and with base, Includes new distributor cap, points, condenser, 6V coil, and all other parts needed for a thorough rebuilt unit, (Item #: 203589) $696.01

Distributor with base less tach drive, Remanufactured - For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2404, 2424, 2444, 2504, 3444, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models T6, T340, 500, Without tachometer drive and with base, Includes new distributor cap, points, condenser, 6V Coil, and all other parts needed for a thorough rebuilt unit, (Item #: 203588) $434.01

Distributor, Rebuilt - Complete remanufactured distributor for Farmall Cub, A, B, C, Super A, H, M, Super H, Super M, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504 tractors with IH distributor with 353898R1 housing casting number. IH original part numbers 353890R91, 107304C91. A refundable $50.00 core charge will be added to your order. (Item #: 203587, Ref: 353898R1) $426.01

F4 Magneto Tune-Up Kit - For International / Farmall tractor models A, B, C, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 450, Contains points and condenser to service F4 magneto, (Item #: 112535) $29.26

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $10.40

No
Picture
Generator - Delco Style (9246), Remanufactured, Delco Remy, 1100964 - For International / Farmall tractor models I6, I9, MD, OS6, Super W6, Super W9, W400, W450, 400, 450, Compatible with International Construction and industrial models TD6, TD9, TD14, Replaces Delco Remy manufacturer number 1100964, Replaces manufacturer number 9246, 340-89, 92-01-3051, Delco Style, Voltage: 12, Rotation: Clockwise, Amperage: 13, Regulator: External, (Item #: 203516) $365.01

Generator Belt - Generator belt, fits engines : C248, C264, and C281. For tractor models: M, 6, Super M, Super W6, 400, W400, 450, W450. For 400, 450, 6, M, Super M, Super W6, W400, W450 (Item #: 111156, Ref: 49341D) $11.70

Generator to Alternator Bracket Set - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, For converting from generator to alternator, (Item #: 113517) $61.00

Generator, Delco Type, 12 Volt - For tractor models 140, 214, 220, 37, 404, 420, 424, 450, 460, 504, 560, 600, 606, 660, 700, 770, 780, 806, 2404, 2424, 2504, 2606, Cub, Lo-Boy, T6, TD6, TD9, Power Unit. Replaces Delco numbers 1100305, 1100335, 1100363, 1100364, 1100369, 1100394, 1100401, 1100409, 1100426, 1100424. Remanufactured. Refundable $25.00 core charge will be added to your order. (Item #: 203181, Ref: TG-59) $370.72

H4 Magneto Pinion Driven Gear - This gear has 24 teeth and measures: 0.380 inch inside diameter, 0.759 inch outside diameter, 1.075 inch gear outside diameter, 0.952 inch overall height. It is used on H4 Magnetos. (Item #: 183878, Ref: 49420DX) $27.10

Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $13.70

Lighting Switch Dimmer Resistor - For International / Farmall tractor models A, B, Cub, H, HV, M, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, TD6, TD9, W4, W6, W9, 100, 130, 200, 230, 300, 350, 400, 450, Replaces International OEM number 47889D, Will Not Fit 154, 184, 185, (Item #: 126566) $16.20

Magneto - This is a New Wico Magneto used on Farmall / IH Models: A, AV, B, BN, C, H, HV, I9, M, MTA, MTAV, MV, O4, O6, OS6, Super A, Super C, Super H, Super M, W4, W6, W6TA, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650. It is also used on some industrials and power units. (Item #: 180178, Ref: XH1344) $558.00

Magneto Coil Cover - For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105661, Ref: 47449DAY) $30.01

Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105662, Ref: 47413DYC) $17.70

Magneto Gasket Set - This magneto gasket set is for H4 Magnetos. It contains; Coil cover gasket 47453D, Distributor body gasket 47408D, Distributor gear cover gasket 49419D, Condenser hole cover gasket 359966R1 (48472DA), Magneto mounting gasket 55780DE (55780DD). Replaces: 359966R1, 47408D, 47453D, 48472DA, 49419D, 55780DD, 55780DE, E4226. For tractor models A, AV, B, BN, C, H, HV, I4, I6, I9, M, MTA, MV, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, T4, T5, T6, T9, U2, U2A, U4, U6, U9, W4, W6, W6TA, W9, WR9, WR9S, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, 400, 450 (Item #: 111272, Ref: MGK103) $10.00

Magneto Rotor H4 Magneto - This Rotor is used on tractors with H4 magneto. Replaces 47425DX, 47425DY, 47428DA (Item #: 111106, Ref: 47425DY) $11.80

Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Item #: 105297, Ref: 21A10R) $22.20

Magneto or Distributor Drive Shaft - Verify part number before ordering. For tractor models (300, 350, 400, 450 all not used with hydra touch system), (H, HV serial number 268224 and up), (M, MD, MDV, MV all serial number 148867 and up), Super H, Super HV, (Super M, Super MTA not used with hydra lift, attached with engine driven pump). (Item #: 173506, Ref: 352079R1) $114.00

Solenoid - Starter solenoid assembly, services Delco starters: 1113034, 1113198, 1113685, 1113053, 1113201, 1113690, 1113176, 1113203, 1113197, 1113647. Hydro 70, 84, 86~ 400, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 1456D, 1466, 1468, 1566, 2400A, 25 For 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2400A, 2500A, 2544, 2656, 2706, 2756, 2826, 2856, 400, 4166, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 756, 766, 826, 84, 856, 86, 966, HYDRO 70, HYDRO 84, HYDRO 86. Replaces 585618C91, 65479C2 (Item #: 105672, Ref: 1115510) $30.00

Spark Plug - Spark Plug 18MM Thread Diameter for: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. Replaces OEM number 360942R1. Also replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs (Item #: 111742, Ref: AL386) $3.20

Spark Plug Wire Set, Custom - IH or Delco Distributors and Magnetos. For the following models with 90 degree angle boots: A, I4, AV, Super A, Super A1, Super AV, SuperAV1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, H, HV, Super H, Super HV, M, MD, Super M, Super MD, Super MDV, MDV, Super MDVTA, MTA, Super MTA, MV, Super MV, Super MVTA, O4, O6, ODS6, OS4, OS6, T340, T5, T6, TD6, SuperW4, W4, Super W6, Super W6TA, W6, W6TA, Super WD6, WD6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404, 424, 444, 450, W450, 504. Replaces the following OEMS: 352947R91, 352951R91, 352954R91, 352956R91, 356687R92, 356689R92, 356691R91, 356694R92, 356695R92, 356697R93, 362439R91, 362789R91, 407487R1, 45327DA, 46277DA, 50075D, 52794D, 65352D, 65357D, 65358D, and 65359D. (Item #: 120100, Ref: S.67475) $17.50

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter - Delco Style (4567), Remanufactured, Delco Remy, 1108646 - For International / Farmall tractor models W450, 350, 450, Replaces Delco Remy manufacturer number 1108646, Replaces manufacturer number 4567, 140-0935, Delco Style, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For Ratchet Style Drive use Item #: 110778, (Item #: 204301) $536.63

No
Picture
Starter - Delco Style (4680), Remanufactured, Delco Remy, 1108996 - For International / Farmall tractor models 400, 450, Replaces Delco Remy manufacturer number 1108996, Replaces manufacturer number 141-103A, 4680, 91-01-3681, Delco Style, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For Starter Drive use Item #: 110801, (Item #: 204296) $495.01

Starter Armature - Used with Delco Starter # 736C, 737B, 737G, 1107067, 1107074, 1107093, 1107169, 1107174, 1107404, 1107407, 1107408, 1107427, 1107430, 1107435, 1107444, 1107448, 1107462, 1107487, 1107490, 1107926, 1107999, 1108012, 1108016, 1108038, 1108041, 1108060, 1108080, 1108092, 1108097, 1108103, 1108112, 1108142, 1108158, 1108173, 1108174. Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Starter drive, services Delco starters: 1108640, 1113176, 1113439, 1113649, 1108646, 1113197, 1113440, 1113684, 1113034, 1113398, 1113489, 1113685, 1113053. 10 teeth For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 186, 21206, 21256, 21456, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 400, 4166, 4186, 450, 6388, 650, 6588, 660, 6788, 706, 756, 766, 786, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186 (Item #: 110778, Ref: 1877350) $32.70

Starter Drive - Replaces; 1877350, 1948877, 1933838, 800965. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21456, 21256, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 350, 3588, 3688, 3788, 4166, 4186, 450, 560, 6388, 6588, 660, 6788, 706, 756, 766, 786, 806, 815, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 3488. With spiral shaft. (Item #: 117546, Ref: 1651487C1) $34.40

Starter Drive - This Starter drive fits gas engines for the following models: A, B, C, H, M, Super A, Super C, Super H, W4, W6, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450 Replaces OEM# 1107021, 1107412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 1107408, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. (Item #: 107059, Ref: 565549) $34.00

Starter Drive - Delco Style - Ratchet Type - For International / Farmall tractor models Hydro 100, Hydro 186, W450, 350, 350U, 400, 450, 460, 560, 660, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4166, 4186, 6388, 6588, 6788, Compatible with International Combine (s) 815, 915, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 500, Replaces International manufacturer number 1107341, 1108640, 1108646, 1107544, 1108659, 1113034, 1113053, 1113176, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, Replaces Delco Remy Starter Drive number 1877350, Replaces Delco Remy Starter number 1108640, 1108646, 1108336, 1109433, 1107390, 1109425, 10455339, 10455354, 10465416, 10465430, 1107341, 1998392, 1998290, 1998300, 10455323, 1107532, 1998332, 1998375, 1107873, 1109260, 1109271, 1107544, 1108659, 1107779, 1113034, 1113053, 1113176, 1113149, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, 1108475, 1113071, 1113117, 1113118, 10455320, Delco Style, Teeth: 10, Outer Diameter: 39.5mm, Inner Diameter: 14.3mm, Rotation: Counter Clockwise, Overall Length: 96.5mm, Clutch Type: Ratchet, Splines: 3, (Item #: 111104) $33.90

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style. For A, B, C, H, M, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450, Super A, Super C, W4, W6 all using the following starters 1107021, 2207412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 11074808, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Item #: 112575, Ref: 565549-New) $37.30

Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $62.00

Starter Switch - Momentary Push Button Ignition Switch. Rubber boot covers push button, 2 screw type terminals, used extensively on I.H. equipment. Serves as starting, horn or reverse lock out switch. Used on various combines, windrowers, balers, cotton pickers, hay conditioners and grain platforms. Also used on Tractors: IHC: Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 4100, 4156, 4166, 4186; Industrial: 1206, 2656; Crawler: T4, T5, TD5. Replaces 366317R91, 366317R93GV (Item #: 112232, Ref: 366317R93) $7.40

Starter with Solenoid, Delco - This starter is 6 Volt, 10 tooth, counter clockwise rotation. For tractor models (300 Farmall), (350 up to serial number 13242 with gas), (400 gas), (450 serial number 501-11083 gas). Replaces: Delco 1107542, 1108038, 1108041, 1108060, 1108092, 1108621, 1107169 or CASE/IH: 361782R91. A Refundable $80 core charge will be added to your order. (Item #: 203158, Ref: 361982R91) $298.70

No
Picture
Starter with Solenoid, Delco, 6 Volt - For International / Farmall tractor models 300 (Farmall, 1/55-12/56), 350 (Farmall, Gas, 1/56-12/58), 400 (Farmall, Gas, 1/54-12/56), 450 (Farmall, Gas, 1/56-12/58), Replaces International OEM number 361982R91, Replaces Case IH OEM number 361782R91, Voltage: 6, Tooth: 10, Rotation: CCW, (Item #: 178952) $263.00

Starter, 12 V - DELCO type, 12 volts, counter clockwise rotation, teeth 10. Tractors: 350 Utility IHC C-175 Gas/LPG 1954 to 1957, 350HC Utility IHC C-175 Gas/LPG 1954 to 1957, Farmall 350 IHC C-175 Gas/LPG 1956 to 1958, Farmall 350HC IHC C-175 Gas/LPG 1956 to 1958, Farmall 450 IHC C-281 Gas/LPG 1956 to 1958, Farmall 450HC IHC C-281 Gas/LPG 1956 to 1958, International W-450 IHC C-281 Gas/LPG 1956 to 1958. (Item #: 203159, Ref: 1108173) $412.00

Terminal Clip - Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Item #: 117534, Ref: 79407H) $6.50

Tune-up Kit - This Tune-up Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 111814, Ref: IHTK1) $29.40

Tune-up Kit - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Cub 154, Cub 185, H, HV, M, MD, Super A, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 560, Thread: 18 mm, (Item #: 181488) $39.10

Tune-up Kit, Basic - This basic tune-up kit is for 4 cylinder gas engines with battery ignition from 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Item #: 105572, Ref: ATK5BIR) $12.00

No
Picture
Wiring Harness - For International / Farmall tractor models 400, 450, Replaces International OEM number 362007R91, 362011R91, 362012R92C, 366318R91, Used with Tractors that have an 18 Gallon Fuel Tank, (Item #: 185185) $379.30

Wiring Harness Kit - Farmall Rowcrop: 400 Gas Rowcrop, 450 Gas Rowcrop To Sn: 11083. For generator systems only. Cotton braided, exactly like original. Includes headlight, wires. All terminals soldered and sealed. Replaces: 362007R91, 362011R91, 362012R92, 366318R91. (Item #: 126779, Ref: R4153) $379.30

No
Picture
Wiring Harness, Headlight - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models 300, 350, (400, 450 gas or diesel). (Item #: 185230, Ref: 362011R91) $58.00

Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For model 450. (Item #: 182711, Ref: 368571R91) $214.30

Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models (400, 450 with 18 gallon fuel tank). (Item #: 185757, Ref: 362007R91) $134.30

No
Picture
Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models (400, 450 with 21 gallon fuel tank). (Item #: 182730, Ref: 365758R91) $171.44

No
Picture
Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models (400, 450 with diesel engine). (Item #: 182731, Ref: 362008R91) $231.44

No
Picture
Wiring Harness, Rear Light - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models 300, 350, (400, 450 gas). (Item #: 184535, Ref: 362012R92) $64.30

Universal Parts and Accessories
Category: Electrical System

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Item #: 114088, Ref: 2348258) $51.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Battery Hold Down - For 8N, 9N, 2N, 2000, 3000, 4000, and others. (Verify battery measurements). Center to center mounting holes 10 1/8 inch. For batteries 8 15/16 inches long and 6 13/16 inches wide. (Item #: 104047, Ref: NCA10718A) $13.70

Battery Hold Down J-Bolts, Pair - This Pair of Battery Hold Down Bolts each measure 10.5 inches long. Price is for a pair. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568. Replaces 98185A1. Also Universal for many other Battery Hold Down Brackets. (Item #: 125150, Ref: 393161R1) $9.50

Battery Joining Cable - This cable is 2 gauge measuring 10 inches. (Item #: B204) $18.75

Battery Joining Cable - This cable is 2 gauge measuring 18 inches. (Item #: B207) $21.00

Battery Joining Cable - The cable is 2/0 gauge measuring 18 inches. (Item #: B1937) $36.00

Battery Joining cable - The cable is 2/0 gauge measuring 12 inches (Item #: 186350, Ref: B1936) $40.30

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

Battery to Starter Cable - This cable is 2/0 gauge measuring 12 inches. (Item #: 183882, Ref: B1931) $33.30

Battery to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: B1932) $25.50

Battery to Starter Cable - This cable is 2/0 gauge measuring 36 inches (Item #: 184665, Ref: B1934) $53.00

Battery to Starter Cable - This cable is 2/0 gauge measuring 48 inches. (Item #: 117381, Ref: B1935) $34.90

Cable, Battery to Starter - This cable is 2 gauge measuring 8 inches. (Item #: 184847, Ref: B188) $15.80

Cable, Battery to Starter - This cable is 2 gauge measuring 12 inches. (Item #: 184028, Ref: B189) $14.40

Cable, Battery to Starter - This cable is 2 gauge measuring 18 inches. (Item #: 184391, Ref: B190) $19.80

Cable, Battery to Starter - This cable is 2 gauge measuring 36 inches. (Item #: 184406, Ref: B192) $24.80

Cable, Battery to Starter - This cable is 2 gauge measuring 48 inches. (Item #: 173479, Ref: B227) $26.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt system without the resistor. Replaces: 74061737, 74514967. (Item #: 140520, Ref: D5TE12029AB) $19.00

Coil Bracket - Universal Coil Bracket (Item #: 107072, Ref: R1940) $6.20

Coil, 12 Volt with Resistance - This is a universal 12 volt coil with internal resistance. It can be used with 12 volt conversions if you don't want to put a resistor in line. Replaces 100402A, 70143, Delco 1115043, AA4879R, AA4983R, AT10399, D2AF12029AA, 1115043, 161861A, 189673M1, 189673M92, 353875R91, 395331R91, 395331R92, 396330R91, 396330R92, 396547R91, 396547R92, 396547R93, 396547R93, 74515665, AV101417, D5TE12029AB, 100402A, 1100-0540, 1100-0544, 1115043, 1200-0541, 1400-0565, 1700-0544, 189673V92, 25270, 70143 (Item #: 105299, Ref: 189673M1) $17.00

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 192483, Ref: 40611) $61.00

Coil, High Performance (Black), 12 Volt, Oil Filled - Heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 105092, Ref: 40511) $40.00

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Item #: 182566, Ref: 40111) $71.00

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Coil has 1.5 Ohms of resistance. (Item #: 125199, Ref: 40011) $29.00

Coil, High Performance (Chrome), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. (Item #: 182567, Ref: 40601) $78.00

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 182550, Ref: 40501) $71.00

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms resistance. (Item #: 182585, Ref: 40001) $59.00

Coil, Ultra High Performance (Black), Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 183385, Ref: 45111) $85.00

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using Ignitor II electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Low 0.6 Ohm primary resistance. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 108304, Ref: 45011) $24.40

Coil, Ultra High Performance (Chrome), Oil Filled - Flame-Thrower II coils feature a very low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high performance ignitions. Low resistance and improved turns ratio help to produce up to 45, 000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes including our own Second Strike. 0.600 ohms Primary Resistance, 9.00K ohms Secondary Resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 182456, Ref: 45001) $66.00

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

No
Picture
Distributor Terminal Insulator Assembly, Delco - Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. (Item #: 111468, Ref: 1904376) $14.80

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20

Pulley - This single groove pulley is 0.920 inches wide, 3.200 inch outside diameter, 0.670 inch center, for 13mm (0.50 inch) Belt. This is as a universal part, please verify measurements before ordering. (Item #: 172973, Ref: R52159) $16.30

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/4-inch reach. Replace Autolite AL65. OEM 834236M1 and 157803A. NOTE: Verify spark plug type before ordering. (Item #: 172892, Ref: AL65) $4.50

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Item #: 130074, Ref: AL3076) $10.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. Copper core. (Item #: 107985, Ref: S2097) $20.00

Spark Plug Wire Set, 4 Cylinder, Universal - For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. Made with carbon impregnated core to suppress radio static and designed to handle the high voltage of electronic ignition systems. (Item #: 108070, Ref: CPN12259EI) $18.00

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, 500 ohms per foot stainless steel wire wound (�Mag Wire�) conductor. The lower resistance of 500 ohms per foot provides more potential energy to fire the spark plug under adverse conditions while preventing harmful RFI and EMI emissions. Also, the wire wound conductor never changes resistance. Longest Reach is 33 inches. This wire set is compatible with Electronic Ignition. (Item #: 178803, Ref: S66465) $24.90

Spark Plug Wire Set, Universal 6 Cylinder - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Item #: 103156, Ref: SWS260) $19.30

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Item #: 103155, Ref: CPN12259) $16.80

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.20

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

Switch to Starter Cable - This cable is 2 gauge measuring 18 inches. (Item #: 184822, Ref: B194) $16.60

Switch to Starter Cable - This cable is 2 gauge measuring 24 inches. (Item #: 185368, Ref: B195) $14.87

Switch to Starter Cable - This cable is 2 gauge measuring 36 inches. (Item #: B196) $21.00

Switch to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: 185109, Ref: B1938) $38.50

Switch to Starter Cable - This cable is 2/0 gauge measuring 24 inches. (Item #: 134614, Ref: B1939) $43.70

Switch to Starter Cable - This cable is 2/0 gauge measuring 36 inches. (Item #: 184663, Ref: B1940) $56.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $13.40

$Farmall 450 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $25.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Electrical System

[Categories] [All 450 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy